Inspector, Quality

1 day ago

Singapore StandardAero Full time

Specific Accountabilities

- Ensure the product to be inspected are sufficiently clean and in acceptable condition to perform the inspections necessary to complete the work instruction.

- Receive, inspect and document incoming parts, ensure specification conform to customer Purchase Order. Raise Change Request if new parts are received.

- Perform visual and dimensional inspection on aero engine / industrial components in accordance with job instructions and customer specifications and other contractual agreements; prepare accurate reparability inspection reports and Repair Summary Sheets.

- Inspect parts received from (OVS) suppliers and ensure conformity to company Purchase Order/ specifications as stated using CMM and /or manual gages required for accurate inspection checks.

- Perform final inspection / dispatch inspection.

- Prepare, review and inspect documents and repaired parts to certify components for release to service.

- Ensure repair work is performed and recorded in a satisfactory manner and in accordance with Part-145 requirements.

- Perform duties as required by relevant Quality Notices and Regulations.

- Ensure that, there is no deviation from the manufacturer’s maintenance instruction or approved airworthiness data, nor make use of alternative parts, components or assemblies unless such deviation is supported by an Engineering Authorization.

- Ensure adequate custody and care of parts, tools and equipment under their responsibility.

- Complete and validate non-conformance record / material review board (NCR/MRB) documentation.

- Participate in audits, inspections, new product development and continuous improvement programs when required.

- Conduct relevant On-The-Job training to maintain their knowledge currency and supervise the work of Quality Inspector trainees in the on-the-job (OJT) process.

- Cross train in other complementary skills and seeks endorsements for those skills as needed to support production requirements.

- Participate in the cross training of other technicians as needed to support production requirements.

- Move between production assignments that utilize multiple skills endorsements as needed to support production requirements.

- Responsible for observing all applicable safety requirements and reporting immediately any unsafe practices / conditions.

- Solve technical issues and problems where appropriate in daily work.

- Carry out other duties as assigned.

Technical Requirements

- Qualified in the detail inspection function.
- Proficient in the use of precision measuring instruments and hand tools.
- Proficient in dimensional inspection techniques.
- Awareness and understanding of Basic Human Factors and Error Management
- Self
- disciplined and able to communicate effectively and work as a team.
- Working knowledge of production management computer system, MS office.
- Knowledgeable in the quality requirements relating to MRO processes

**Qualifications**:

- Diploma in Aerospace Engineering from a Singapore institution of higher learning with CAAS M10/L11/L12/CO1, M15 or equivalent OR
- ‘O’ Level/NITEC/Diploma in Precision/ Mechanical Engineering with M10/L11/L12/CO1, CO2, TM1 and M15 or equivalent
- EASA M9 and EASA M10 certificates
- Must have necessary certifications to sign ARC for MRO with CAAS C7 and EASA C5/C7/C14 Ratings.
- 5 years’ experience in aerospace component MRO facility with relevant experience as a CRS inspector

  • Welding Inspector

    1 week ago

    Singapore AQS QUALITY SERVICES PTE. LTD. Full time

    The welding inspector shall be certified as an American Welding Society. - When performing, reviewing or ensuring Nonsdestructive Testing in VT, MT, PT, RT or UT, WI shall be certified in the specific method (s). - Prepare, review of Welding Procedure Specifications (WPS) based on ASME and EN Standards. - To qualify welders for project and supervise,...

  • Quality Inspector

    17 hours ago

    Singapore CYRUS TECHNOLOGY (S) PTE. LTD. Full time $19,200 per year

    QUALITY INSPECTORAbout CyrusCyrus Technology (S) Pte Ltd promotes a customer-focused culture centred on collaboration, innovation, and excellence. Specializing in high-precision manufacturing of polymeric parts, we deliver tailored solutions that meet the highest standards of quality. Our proactive, supportive environment encourages ownership,...

  • Quality Control Inspector

    3 days ago

    Singapore GLOBALTRONIC BIO-TECH PRECISION (PTE. LTD.) Full time

    **Job description**: - Perform dimensional/functional inspection of First Article (FA), Incoming, In-process or Outgoing parts in accordance to Work Instructions to ensure that components and products conform to specifications. - Ensure the compliance of equipment and tools use during inspection in accordance to Calibration and Preventive Maintenance...

  • Quality Inspector I

    5 days ago

    Singapore Ultra Clean Technology Full time

    Join UCT and be part of the fastest-growing sector in the world! We indirectly touch every semiconductor chip that goes into every smartphone, smart car, and device that uses artificial intelligence.This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented...

  • Quality Inspector

    6 days ago

    Singapore ULTRA CLEAN ASIA PACIFIC PTE. LTD. Full time

    **Join UCT**and be part of the **fastest-growing sector in the world!**We indirectly touch every semiconductor chip that goes into every smartphone, smart car and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every...

  • Quality Inspector

    1 week ago

    Singapore INGERSOLL-RAND SINGAPORE ENTERPRISES PTE. LTD. Full time

    **Job Summary** We are looking for a detail-oriented **Quality Inspector**to oversee quality control of the overhaul production process. This role involves identifying and resolving quality issues, maintaining accurate records, and supporting audits to ensure compliance with quality standards. **Responsibilities** - Develop and manage quality process...

  • Quality Control Inspector

    5 hours ago

    Singapore GLOBALTRONIC PRECISION PTE. LTD. Full time

    5.5 Days Work WeekMonday to Friday : 0830 - 1730Saturday : 0830 - 1230Job Responsibilities: Perform dimensional/functional inspection of First Article (FA), Incoming, In-process or Outgoing parts in accordance to Work Instructions to ensure that components and products conform to specifications. Ensure the compliance of equipment and tools use during...

  • Quality Inspector

    2 weeks ago

    Singapore Connect Energy Full time

    We are looking for QUALITY INSPECTOR (WELDING) to work in Bukom for 1 year contract. Assist QA/QC Supervisor as described (but not limited to) below: Responsibilities Daily implementation and execution of quality assurance and control surveillance and inspection in ensuring all fabrication, production, construction and installations are complies with project...

  • Quality Inspector

    2 weeks ago

    Singapore Baker Hughes Full time

    **Quality Inspector - Product Quality Control** **Would you like to be part of a team that puts quality first?** **Are you passionate about Quality in Manufacturing?** **Join our Quality Control Team** Baker Hughes has developed a comprehensive portfolio of systems and products to deliver optimal subsea solutions. That means we consistently deliver...

  • Quality Inspector

    1 week ago

    Singapore Connect Energy Full time

    We are looking for a FIELD JOINT COATING (FJC) QUALITY INSPECTOR to work in Bukom Island for one year contract. Responsibilities Daily implementation and execution of quality assurance and control surveillance and inspection in ensuring all fabrication, production, construction and installations are complies with project contract, specifications, and codes...