Inspector, Quality

4 hours ago

Singapore Standard Aero Full time $60,000 - $120,000 per year
Description

Specific Accountabilities

  • Ensure the product to be inspected are sufficiently clean and in acceptable condition to perform the inspections necessary to complete the work instruction.

  • Receive, inspect and document incoming parts, ensure specification conform to customer Purchase Order. Raise Change Request if new parts are received.

  • Perform visual and dimensional inspection on aero engine / industrial components in accordance with job instructions and customer specifications and other contractual agreements; prepare accurate reparability inspection reports and Repair Summary Sheets.

  • Inspect parts received from (OVS) suppliers and ensure conformity to company Purchase Order/ specifications as stated using CMM and /or manual gages required for accurate inspection checks. 

  • Perform final inspection / dispatch inspection. 

  • Prepare, review and inspect documents and repaired parts to certify components for release to service. 

  • Ensure repair work is performed and recorded in a satisfactory manner and in accordance with Part-145 requirements.

  • Perform duties as required by relevant Quality Notices and Regulations.

  • Ensure that, there is no deviation from the manufacturer's maintenance instruction or approved airworthiness data, nor make use of alternative parts, components or assemblies unless such deviation is supported by an Engineering Authorization. 

  • Ensure adequate custody and care of parts, tools and equipment under their responsibility.

  • Complete and validate non-conformance record / material review board (NCR/MRB) documentation.

  • Participate in audits, inspections, new product development and continuous improvement programs when required.

  • Conduct relevant On-The-Job training to maintain their knowledge currency and supervise the work of Quality Inspector trainees in the on-the-job (OJT) process.

  • Cross train in other complementary skills and seeks endorsements for those skills as needed to support production requirements.

  • Participate in the cross training of other technicians as needed to support production requirements.

  • Move between production assignments that utilize multiple skills endorsements as needed to support production requirements.

  • Responsible for observing all applicable safety requirements and reporting immediately any unsafe practices / conditions.

  • Solve technical issues and problems where appropriate in daily work.

  • Carry out other duties as assigned.

Technical Requirements

  • Qualified in the detail inspection function.
  • Proficient in the use of precision measuring instruments and hand tools.
  • Proficient in dimensional inspection techniques.
  • Awareness and understanding of Basic Human Factors and Error Management
  • Self- disciplined and able to communicate effectively and work as a team.
  • Apply workplace safety and health practices and perform basic safety practices and documentation. Apply 5S and basic CI techniques in the workplace. 
  • Working knowledge of production management computer system, MS office.

  • Knowledgeable in the quality requirements relating to MRO processes

Qualifications

  • Diploma in Aerospace Engineering from a Singapore institution of higher learning with CAAS M10/L11/L12/CO1, M15 or equivalent OR
  • 'O' Level/NITEC/Diploma in Precision/ Mechanical Engineering with M10/L11/L12/CO1, CO2, TM1 and M15 or equivalent
  • EASA M9 and EASA M10 certificates
  • Must have necessary certifications to sign ARC for MRO with CAAS C7 and EASA C5/C7/C14 Ratings. 
  • 5 years' experience in aerospace component MRO facility with relevant experience as a CRS inspector

  • Quality Inspector

    1 week ago

    Singapore MECHEM ENGINEERING & TRADING CO PTE LTD Full time

    1) Quality inspection on spray coated completed components 2) Verify that quality meets customer's specifications and drawings 3) Liaise with customers and production for quality related matters 4) Quality improvement projects in accordance with organisational objectives 5) Implementation of quality improvement projects 6) Attend join inspection with...

  • Quality Inspector

    20 hours ago

    Singapore Flowserve Corporation Full time

    Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your...

  • Quality Inspector

    1 day ago

    Singapore CYRUS TECHNOLOGY (S) PTE. LTD. Full time

    Roles & Responsibilities QUALITY INSPECTOR About Cyrus Cyrus Technology (S) Pte Ltd promotes a customer-focused culture centred on collaboration, innovation, and excellence. Specializing in high-precision manufacturing of polymeric parts, we deliver tailored solutions that meet the highest standards of quality. Our proactive, supportive environment...

  • Plant Inspector

    1 week ago

    Singapore AQS QUALITY SERVICES PTE. LTD. Full time

    Knowledge / experience about piping Isometrics, P & ID, Structural drawings. - Provide technical advice / support to daily operational issues. - Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications as per Codes, Standards & Client...

  • Quality Inspector

    6 days ago

    Singapore CYRUS TECHNOLOGY (S) PTE. LTD. Full time $19,200 per year

    QUALITY INSPECTORAbout CyrusCyrus Technology (S) Pte Ltd promotes a customer-focused culture centred on collaboration, innovation, and excellence. Specializing in high-precision manufacturing of polymeric parts, we deliver tailored solutions that meet the highest standards of quality. Our proactive, supportive environment encourages ownership,...

  • Quality Control Inspector

    2 weeks ago

    Singapore GLOBALTRONIC BIO-TECH PRECISION (PTE. LTD.) Full time

    **Job description**: - Perform dimensional/functional inspection of First Article (FA), Incoming, In-process or Outgoing parts in accordance to Work Instructions to ensure that components and products conform to specifications. - Ensure the compliance of equipment and tools use during inspection in accordance to Calibration and Preventive Maintenance...

  • Quality Inspector

    3 hours ago

    Singapore Connect Energy Full time $80,000 - $120,000 per year

    Job Description: We are looking for QUALITY INSPECTOR (WELDING) to work in Bukom for 1 year contract. Roles & ResponsibilityAssist QA/QC Supervisor as described (but not limited to) below:Daily implementation and execution of quality assurance and control surveillance and inspection in ensuring all fabrication, production, construction and installations...

  • Quality Control Inspector

    5 days ago

    Central Singapore Emprego SG Full time

    **Location** Singapore, Central Singapore **Job Type** Permanent **Salary** $1,650 - $1,770 Per Month **Date Posted** 56 minutes ago Additional Details **Job ID** 9727 **Job Views** 1 Roles & Responsibilities **Quality Control Inspector** **The job** - Perform quality inspection from incoming, in-process and outgoing shipment. - Support...

  • Inspector, Quality

    5 days ago

    Singapore StandardAero Full time

    Join to apply for the Inspector, Quality role at StandardAero 1 week ago Be among the first 25 applicants Job Description Ensure the product to be inspected are sufficiently clean and in acceptable condition to perform the inspections necessary to complete the work instruction. Receive, inspect and document incoming parts, ensure specification conforms to...

  • Quality Control Inspector

    3 days ago

    Singapore Globaltronic Precision Pte Ltd Full time

    Perform dimensional/functional inspection of First Article (FA), Incoming, In-process or Outgoing parts in accordance to Work Instructions to ensure that components and products conform to specifications. Ensure the compliance of equipment and tools use during inspection in accordance to Calibration and Preventive Maintenance requirements. Maintain the...