Certified Lifting Inspector

Roles & Responsibilities - Verifying conformance of use of specified materials and their proper usage. - Supervise and inspect all field welding works. - Monitoring and reporting conformance with approved welding procedure specifications. - Monitor and report conformance with approved non-destructive test procedure specifications. - Conducting visual...

**Job ID**: We require an **Inspector/Technician** with experience in inspecting items such as: - Lifting Gear / tackles - MUST possess valid Shell smart card - Valid BOSIET and Sarawak Permit

**Job ID**: - Minimum Qualifications are Higher National Diploma (HND) or preferably degree in Mechanical Engineering with 10 years’ experience in this field. - To have knowledge of the lifting regulations. - Lifting Equipment Engineer/Inspector from the following location will be required: 1. China 2. India 3. Indonesia 4. Japan 5. Malaysia 6. New...

**Responsibilities**: - Review and verify welding specifications and drawings for each project. - Ensure proper equipment, consumables, and materials are used for welding tasks. - Conduct visual and dimensional inspections of completed welds. - Assess the quality, strength, and integrity of welds against applicable codes and standards. - Recommend...

**Job ID**: Project in Johor, Malaysia looking for Inspector with the below qualifications and preferably with SI913 experience. This is for a Subsea position. Project requirement for 3 to 6 months. We have additional request for inspectors to be stationed at our plant for 6 months. See below are requirements. 1. Welding Inspector - Qualification: Minimum...

**Job ID**: **Job Description**: Inspectors who have competencies and certifications inclusive of two parts (1) demonstrated experienced by an independent certification scheme in the discipline of inspection being conducted; and (2) demonstrated experience in codes and standards, and general industry requirements applicable to the inspection event for the...

The welding inspector shall be certified as an American Welding Society. - When performing, reviewing or ensuring Nonsdestructive Testing in VT, MT, PT, RT or UT, WI shall be certified in the specific method (s). - Prepare, review of Welding Procedure Specifications (WPS) based on ASME and EN Standards. - To qualify welders for project and supervise,...

**Job ID**: - INSPECTOR shall monitor the project and manufacturing progress of these CNG package and PRU pressure vessels & Vent stack in accordance with ITP and project schedules. - The INSPECTOR shall report any anticipated delays to the work immediately to COMPANY. - The INSPECTOR shall expedite and monitor progress of fabrication and manufacturing by...

Looking for an AE to set lead lifting inspection activities and to conduct periodic tests on Lifting Equipment as per local guidelines and requirements. Must be a thorough knowledge of crane and lifting appliances inspection methods as per Workplace Safety and Health. LEEA-qualified engineers are also welcome. Need to perform various operational/functional...

**Key Responsibilities**: - Conduct visual inspections of welds before, during, and after welding - Verify welding procedures (WPS), welder qualifications (WPQ), and material traceability - Monitor welding activities in accordance with standards (AWS D1.1, ASME IX, ISO 5817) - Identify welding defects and issue Non-Conformance Reports (NCRs) as necessary -...