Current jobs related to Equipment Engineer - Clementi - Advanced Micro Foundry

  • Service Engineer/senior Service Engineer, Workshop

    2 weeks ago

    Clementi, Singapore Martest Engineering Pte Ltd Full time

    Job Responsibilities: - Carrying out maintenance, service and repair of all mechanical equipment (diesel engines, pumps, gearboxes, couplings, alternators, turbochargers, etc) on board all vessels as assigned by Workshop Manager - Troubleshooting all the mechanical equipment on board vessels - Planning and executing the repair job in the most cost effective...

  • Project Engineer

    4 days ago

    Clementi, Singapore Seng & Keng Construction Pte Ltd Full time

    RESPONSIBILITIES - Be part of the site team to perform engineering design, project management and oversee drawing management, and control of technical documentation; - Good knowledge of Singapore Building Regulations and codes, design development & detailing; - To assist Project Manager for site planning, coordination, supervision, monitoring and...

  • Service Engineer

    4 days ago

    Clementi, Singapore HEXA PACIFIC PTE LTD Full time

    This resource will be asked to provide after sales service and new equipment installation support. Duties will include, but are not limited to, repair/technical service for installed equipment, installation oversight, commissioning support and chemical resupply support. Required training will be provide by certified training center and on-site operational...

  • Automation and System Engineer

    1 week ago

    Clementi, Singapore Primera Electrical and Control Engineering Pte Ltd Full time

    **Company description** Primera Electrical & Control Engineering was started in year 2012 as sole proprietor and incorporated as Primera Electrical & Control Engineering Private Limited in year 2015. Our competent team is equipped with extensive years of field experiences and technical know-how which well positioned us as a value added system integrator in...

  • Automation and System Engineer

    1 week ago

    Clementi, Singapore Primera Electrical and Control Engineering Pte Ltd Full time

    **Company description** Primera Electrical & Control Engineering was started in year 2012 as sole proprietor and incorporated as Primera Electrical & Control Engineering Private Limited in year 2015. Our competent team is equipped with extensive years of field experiences and technical know-how which well positioned us as a value added system integrator in...

  • Mechanical & Electrical Engineer

    5 days ago

    Clementi, Singapore SATS Full time

    **About us** SATS is Asia's leading provider of food solutions and gateway services. Using innovative food technologies and resilient supply chains, we create tasty, quality food in sustainable ways for airlines, foodservice chains, retailers and institutions. With heartfelt service and advanced technology, we connect people, businesses and communities...

  • Electrical Design Engineer #65764

    2 weeks ago

    Clementi, Singapore Anradus Pte Ltd Full time

    Industry/ Organization Type: Manufacture of Electrical Equipment - Position Title**:Electrical Design Engineer**: - Working Location: Clementi - Working Hours: Monday - Friday, 8am - 5pm/9am - 6pm - Salary Package**:Up to $4000 + AWS + Performance Bonus + Phone Allowance**: - Duration: Permanent **Key Responsibilities** - Collaborate with the Sales...

  • Senior Engineer

    1 week ago

    Clementi, Singapore Aibel Pte Ltd Full time

    Job responsibilities:Report to the Head of Department at basis level and to the Lead Electrical Engineer at project level.Implement Company work processes, procedures and quality policies as required by project.Review Company contractual requirements, scope boundaries and support the Lead Engineer with the Management of change on assigned areas.Manage...

  • Lead Process Engineer

    2 weeks ago

    Clementi, Singapore SG ENVIRO PTE. LTD. Full time

    **About Us** SG Enviro is a Singapore headquartered water company and our expertise is in the area of industrial wastewater treatment (particularly in hard-to-treat/recalcitrant contaminants) and water reclamation/recycling, leveraging on SG Enviro’s proprietary Non-thermal Plasma and Nano-bubble technology. - The core services provided by SG Enviro...

  • Civil & Structural Resident Engineer

    1 week ago

    Clementi, Singapore BECA Full time

    Project: HDB at Clementi (BTO)Job Description:Provide standing supervision as and when directed by Consultant team.Witness all inspections, testing and commissioning sessions performed by Sub-contractors to ensure compliance with quality standards, designs and specifications.Compile relevant equipment, material, inspection and test certificated submitted by...

Equipment Engineer

3 weeks ago

Clementi, Singapore Advanced Micro Foundry Full time

Job Descriptions:

  • Create Equipment PM checklists, CM checklists and all maintenance related procedures and compliance with CSR,
  • EHS, QM, ESD, 6S standard and cleanroom protocol
  • Respond to breakdowns, diagnose faults and repair equipment for 24/7 operation support
  • Maintain optimum utilization of equipment and resources and constantly review methods of OEE management to
  • reduce tool downtime and increase equipment throughput with Safety, Quality and maintain good 6S
  • Liaise with equipment vendors and spare parts suppliers continuously to develop new methods to achieve low cost
  • maintenance system for cost reduction, weed out unwarranted expenses/ wastages, improve equipment performance
  • Set-up SPC for equipment critical parameters monitoring and control
  • Incorporate efficient methods of maintaining new equipment or plant and may be involved in the installation and
  • commissioning process.
  • Write maintenance strategies to help with installation and commissioning guidelines
  • Ensure there is continuous cover of the machinery and equipment in case of breakdowns.
  • Drive the team of Technicians to participate in all continuous improvement projects related to OEE improvement
  • Plan & undertake scheduled maintenance & develop methods for predictive maintenance
  • Work on improvement projects with process engineers and across modules to assure continuous reliability of
  • production equipment and processes to achieve high equipment productivity, quality and low downtime.
  • Formulate with process engineering team on all equipment control procedures and troubleshoot on machine related
  • defects and quality issues and prevention systems
  • Participate in AMF IP and Know-How Reward Scheme projects
  • Performs other duties as assigned. Duties will vary according to the project progress and/or the specific goals of the
  • division.

Requirements:

  • Candidate must possess at least Bachelor's Degree in Mechanical / Electrical / Material / Chemical or similar Engineering field or equivalent minimum 5 years working experience in the field of Photolithography or Metrology Equipment Engineering.
  • Hands-on experience in photolithography or metrology equipment troubleshooting CM and PM, engineering methods for equipment controls and OEE improvement.
  • Practical knowledge and understanding of 24/7 semiconductor manufacturing and cleanroom operation environment
  • Strong knowledge and experience in engineering troubleshooting and parts repair in maintaining Litho or Metro tools are preferred, such as Nikon scanners, TEL tracks, Hitachi CDSEM, KLA Archer OVL, Electrical /Optical tester,Thermawave Optiprobe, Rudolph Firefly or KLA defect scanner, Stylus Profilometer, Microscope, Sorter, EVG/SVG litho tools
  • SPC/FDC/RTM/FMEA/8D/6S/Risk Assessment knowledge, preferably from wafer fab and, with expertise in equipment & basic photolithography process knowledge and with an eye for detail.
  • Strong project management skills, accountable and takes ownership, ability to multi-task and prioritize and with sense of urgency
  • Strong data analysis, problem-solving skill, and eager for learning different tools type to maintain and troubleshoot
  • Must be able to work on 8 hours Normal or swing shift (5 days week: either Sunday-Thursday or Tuesday-Saturday)
  • MS Office and computer skills literate.