Senior / Principal Power R&D Engineer
Found in: Talent SG 2A C2 - 3 weeks ago
· Design power supply hardware for various switching mode power converters (3-phase Vienna Rectifier, NPC, PFC, Flyback, Forward, Buck, Boost, Resonant topologies, and Synchronous Rectification), ranging from 1,000W to 22,000W.
· Design on-board-charger requirement, compact and high-power density requirement.
· Design to meet functional safety and reliability standards. For automotive grade.
· Theoretical analysis of concepts (calculation and simulation).
· Practical and detail evaluation on all types of power circuits.
· Enhance and improve circuit performances such as Efficiency and Reliability.
· Creation of 3D/2D models, assembly drawings, PCB and schematic designs.
· Support firmware development using various DSP/MCU platforms.
· As project key person to start from concept to mass production stage.
· Implement design for manufacturing and design for automation. DFx.
· Patent and technology creation, defining new power requirement.
· Electrical and Firmware architectures (lead and support).
Key Requirements:
· BSc, MSc, PhD or researcher with 2 to 5 years’ experience is welcome.
· Experience >5 years will be considered for senior position.
· Experience with EV charger, On-Board-Charger (OBC) is a plus.
· Familiar with power measurement equipment.
· With solid technical know-how on transformer, power Mosfet, PWM controller and synchronous rectifier circuits.
· Understand the application of PID controllers and control loop analysis.
· Knowledge on EMC/IEC/UL/EN standards.
· Experience in PCB schematic and layout designs
· Experience in C programming.
· Experience with Solidworks drawing is a plus.
· Experience with development tools, for examples PADS, PSIM, MathCad, LTSpice, Ansys, Matlab, etc.
· Able to travel for manufacturing/business supports.
· Good interpersonal skill and result oriented.
#J-18808-Ljbffr
-
Senior Power Module R&D Engineer
1 week ago
Singapore Aristos Search Llp Full timeSenior Power Module R&D EngineerJob Responsibilities:Support process and efficiency improvement activitiesResponsible to source new material for internal R&D activitiesAlign with factories on product improvement and enhancementInitiate new product prototype with new innovative process, material and methodologyResponsible for conducting & optimising advanced...
-
Power Module R&D Engineer
1 week ago
Singapore Aristos Search Llp Full timePower Module R&D EngineerJob Responsibilities:Support process and efficiency improvement activitiesResponsible to source new material for internal R&D activitiesAlign with factories on product improvement and enhancementInitiate new product prototype with new innovative process, material and methodologyResponsible for conducting & optimising advanced...
-
Power Module R&D Engineer
Found in: Talent SG 2A C2 - 2 weeks ago
Singapore ARISTOS SEARCH LLP Full timeRoles & ResponsibilitiesPower Module R&D EngineerJob Responsibilities: Support process and efficiency improvement activities Responsible to source new material for internal R&D activities Align with factories on product improvement and enhancement Initiate new product prototype with new innovative process, material and methodology Responsible for...
-
Senior R&D Engineer, Wirebond
1 week ago
Singapore Aristos Search Llp Full timeSenior R&D EngineerJob Responsibilities:Support process and efficiency improvement activitiesResponsible to source new material for internal R&D activitiesAlign with factories on product improvement and enhancementInitiate new product prototype with new innovative process, material and methodologyResponsible for conducting & optimising advanced packaging...
-
Senior Principal Engineer
Found in: Talent SG 2A C2 - 7 days ago
Singapore PEOPLE PROFILERS PTE. LTD. Full timeRoles & ResponsibilitiesResponsibilities Bring in the expertise in heterojunction solar cell process development and integration to increase cell efficiency in production. Bring next generation and novel solar cell processes for CVD and PVD for high-efficiency crystalline silicon solar cells applications. - Transfer of newly developed processes to...
-
Senior Principal Engineer
5 days ago
Singapore People Profilers Pte. Ltd. Full timeResponsibilitiesBring in the expertise in heterojunction solar cell process development and integration to increase cell efficiency in production.Bring next generation and novel solar cell processes for CVD and PVD for high-efficiency crystalline silicon solar cells applications. - Transfer of newly developed processes to production as part of the delivery...
-
Senior Analyst
1 week ago
Singapore Aristos Search Llp Full timeSenior Analyst â€' R&DCo-operate with R&D and Production Team on qualification of proposed projectsLiaise with finance and procurement team, build cost model and analyse cost impact of proposed projectsFiled patent of innovative technical concepts that were proven to work and are applicable in Semiconductor packaging industryProvided quarterly financial...
-
FlipChip R&D Engineer
23 hours ago
Singapore Aristos Search Llp Full timeFlipChip R&D EngineerJob Responsibilities:Support process and efficiency improvement activitiesResponsible to source new material for internal R&D activitiesAlign with factories on product improvement and enhancementInitiate new product prototype with new innovative process, material and methodologyResponsible for conducting & optimising advanced packaging...
-
Lithography R&D Engineer
2 days ago
Singapore Aristos Search Llp Full timeLithography R&D EngineerJob Responsibilities:Support process and efficiency improvement activitiesResponsible to source new material for internal R&D activitiesAlign with factories on product improvement and enhancementInitiate new product prototype with new innovative process, material and methodologyResponsible for conducting & optimising advanced...
-
FlipChip R&D Engineer
Found in: Talent SG 2A C2 - 3 days ago
Singapore ARISTOS SEARCH LLP Full timeRoles & ResponsibilitiesFlipChip R&D EngineerJob Responsibilities: Support process and efficiency improvement activities Responsible to source new material for internal R&D activities Align with factories on product improvement and enhancement Initiate new product prototype with new innovative process, material and methodology Responsible for conducting...
-
Lithography R&D Engineer
Found in: Talent SG 2A C2 - 3 days ago
Singapore ARISTOS SEARCH LLP Full timeRoles & ResponsibilitiesLithography R&D EngineerJob Responsibilities: Support process and efficiency improvement activities Responsible to source new material for internal R&D activities Align with factories on product improvement and enhancement Initiate new product prototype with new innovative process, material and methodology Responsible for...
-
Silicon Design R&D Engineer
2 days ago
Singapore Aristos Search Llp Full timeSilicon Design R&D EngineerJob Responsibilities:Support process and efficiency improvement activitiesResponsible to source new material for internal R&D activitiesAlign with factories on product improvement and enhancementInitiate new product prototype with new innovative process, material and methodologyResponsible for conducting & optimising advanced...
-
Silicon Design R&D Engineer
Found in: Talent SG 2A C2 - 3 days ago
Singapore ARISTOS SEARCH LLP Full timeRoles & ResponsibilitiesSilicon Design R&D EngineerJob Responsibilities: Support process and efficiency improvement activities Responsible to source new material for internal R&D activities Align with factories on product improvement and enhancement Initiate new product prototype with new innovative process, material and methodology Responsible for...
-
Senior Mechanical Engineer
8 hours ago
Singapore Xnergy Autonomous Power Technologies Pte. Ltd. Full timeDepartment: R&DReport to: R&D DirectorWe are looking for a senior Mechanical Engineer to join us in Singapore, with opportunities to travel overseas.In this role, you will be responsible for the mechanical design, development and testing for Xnergy wireless power and power conversion products.This includes various stages in a product's life cycle such as...
-
R&D Process Engineer
1 week ago
Singapore Avago Technologies International Sales Pte. Limited Full timeResponsible for designing/ implementing packaging process of new isolation products.Evaluates reliability of materials, properties and techniques, explore new process methodology used in production.Perform Design of Engineering Experiment (DOE) and optimization of new developed processes.Carry out R&D programs with IC designer, product engineer and...
-
Senior Mechanical Engineer
Found in: Talent SG 2A C2 - 2 days ago
Singapore XNERGY AUTONOMOUS POWER TECHNOLOGIES PTE. LTD. Full timeRoles & ResponsibilitiesDepartment: R&DReport to: R&D DirectorWe are looking for a senior Mechanical Engineer to join us in Singapore, with opportunities to travel overseas.In this role, you will be responsible for the mechanical design, development and testing for Xnergy wireless power and power conversion products.This includes various stages in a...
-
Power Electronics Engineer
1 week ago
Singapore Leoch Battery Pte. Ltd. Full timeResponsibilities:Assist on design and implement power/control circuit for power converters, conduct design.Validation tests and work cross-functionally with other development groups.Work closely with R&D Team, mechanical, field applications, and production teams for specifications, design, prototyping, and fabrication.Plan and schedule to meet goals,...
-
Senior Firmware Engineer/ Firmware Engineer
1 week ago
Singapore Alpha Ess International Pte. Ltd. Full timeJob Function:Mainly responsible for the Grid-tied Inverter, DC-DC converters, and for the R&D job scopes including power electronics controls, advanced algorithms, prototype validation, and firmware coding design, etc. You will work closely with the R&D team (hardware, firmware, and software engineers) to contribute to the power converter design and shape...
-
R&D Process Engineer
Found in: Talent SG 2A C2 - 3 weeks ago
Singapore AVAGO TECHNOLOGIES INTERNATIONAL SALES PTE. LIMITED Full timeRoles & Responsibilities Responsible for designing/ implementing packaging process of new isolation products. Evaluates reliability of materials, properties and techniques, explore new process methodology used in production. Perform Design of Engineering Experiment (DOE) and optimization of new developed processes. Carry out R&D programs with IC...
-
R&D Senior Mechanical Engineer
1 week ago
Singapore GMP Technologies Full timeJob ResponsibilitiesSupport Mass Production And Procurement Help and support mechanical components/systems procurementEnsure the availability of our products over their entire life cycle with respect to the best possible price and qualityMechanical System Design Combining market needs with mechanical solutions, implement the product specification in a...